User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 544 System Manual
3.9.9.4.2 Deleting Neighbor BS Specific BS Triggers
To delete an entry from the neighbor BS specific BS triggers table run the
following command:
npu(config-bs-66053-nbr-68000)# no <specific-trigger-name>
3.9.9.5 Terminating the Neighbor BS Configuration Mode
Run the following command to terminate the Neighbor BS configuration mode:
npu(config-bs-66053-nbr-68000)# exit
NOTE
Refer to Table 3-29 for a description and possible values of the triggers.
Command
Syntax
npu(config-bs-66053-nbr-68000)# no <trigger-name>
Privilege
Level
10
Command
Modes
bs neighbor bs configuration mode
NOTE
Refer to Table 3-30 for a description and possible values of the triggers.
Command
Syntax
npu(config-bs-66053-nbr-68000)# no <specific-trigger-name>
Privilege
Level
10
Command
Modes
bs neighbor bs configuration mode