User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 536 System Manual
[frequency
<(2022.5 to 2217.5
StepSize 0.125) |
(2302.5 to 2397.5
StepSize 0.125) |
(2487.5 to 2687.5
StepSize 0.125) |
(3302.5 to 3397.5
StepSize 0.125) |
(3402.5 to 3597.5
StepSize 0.125) |
(3602.5 to 3797.5
StepSize 0.125)> ]
Downlink center
frequency of neighbor
BS.
Should be taken from
RF frequency
parameter of the
relevant BS (see
Section 3.9.10.2)
Mandatory
When
creating a
new
Neighbor
BS.
N/A
 2022.5 to 2217.5
in steps of 0.125
 2302.5 to 2397.5
in steps of 0.125
 2487.5 to 2687.5
in steps of 0.125
 3302.5 to 3397.5
in steps of 0.125
 3402.5 to 3597.5
in steps of 0.125
 3602.5 to 3797.5
in steps of 0.125
[preamble-idx <(0
to 113 StepSize 1)>
]
Neighbor BS Preamble
Index.
When translated to an
8 bits binary string, bits
0-6 of this parameter
are used to indicate the
neighbor BS preamble
index. Bit 7 is used to
indicate the neighbor
BS reuse type for CINR
measurement for
handover purposes
Bits 0-6 should be the
same as preamble-idx
in displayed
information of Airframe
General parameters of
the relevant BS (see
Section 3.9.12.5.1
Mandatory
When
creating a
new
Neighbor
BS.
N/A 0 - 255
[paging-grp-id <(0
to 65535 StepSize
1)> ]
The neighbor BS
Paging Group Id
Should be taken from
Idle Mode
paging-group-id
parameter of the
relevant BS (see
Section 3.9.23)
Optional 0 0 - 65535