User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 535 System Manual
[bw {fiveMHz |
tenMHz |
sevenMHz} ]
The bandwidth of
neighbor BS.
Should be taken from
Baseband bandwidth
parameter of the
relevant BS (see
Section 3.9.11.2)
Mandatory
When
creating a
new
Neighbor
BS.
N/A
 fiveMHz
 tenMHz
 sevenMHz
[feedbackzone-per
mbase <(0 to 69
StepSize 1)> ]
The first uplink zone
permutation base of
the neighbor BS.
In current release this
equals the feedback
zone permutation base
(see
Section 3.9.12.5.4)
Mandatory
When
creating a
new
Neighbor
BS.
N/A 0 - 69
[ucd-configchangec
ount <(0 to 255
StepSize 1)>]
UCD configuration
change count of
neighbor BS
In the current release
must be set to 0.
Mandatory
When
creating a
new
Neighbor
BS.
N/A 0 - 255
must be set to 0
[dcd-configchangec
ount <(0 to 255
StepSize 1)> ]
DCD configuration
change count of
neighbor BS
In the current release
must be set to 0.
Mandatory
When
creating a
new
Neighbor
BS.
N/A 0 - 255
must be set to 0
eirx-pir-max <(-140
to -40 StepSize 1)>
The required effective
isotropic received
power at the Neighbor
BS for Initial ranging, in
dBm.
Should be taken from
Power Control
maxeirxp (see
Section 3.9.4.5.2)
Optional -124 -140 to -40