User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 529 System Manual
3.9.8.2 Restoring the Default Value of Scan Negotiation Parameters
To restore the Scan Negotiation enable-modify parameter to the default value, run
the following command:
npu(config-bs-66053)# no scanning [enable-modify]
3.9.8.3 Displaying Configuration Information for Scan Negotiation
Parameters
To display configuration information for Scan Negotiation parameters, run the
following command:
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[enable-modify {TRUE
| FALSE} ]
Determines whether the
BS will modify unfeasible
scan profiles requested by
MSs.
Note: If TRUE the BS will
modify unfeasible scan
profile requests and if
FALSE the BS will deny
the requests.
Optional true
 true
 false
Command
Modes
bs configuration mode
NOTE
Refer to Section 3.9.8.1 for a description and default value of this parameter.
Command
Syntax
npu(config-bs-66053)# no scanning [enable-modify ][
Privilege
Level
10
Command
Modes
bs configuration mode