User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 528 System Manual
3.9.8 Managing Scan Negotiation Parameters
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the Scan Negotiation parameters (refer to
Section 3.9.8.1).
 Restore the default values of some or all of the Scan Negotiation parameters
(refer to Section 3.9.8.2).
You can display configuration information for the Scan Negotiation parameters of
a selected or all existing BSs (refer to Section 3.9.8.3).
3.9.8.1 Configuring Scan Negotiation Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# scanning [enable-modify {true | false}]
Display
Format
(for a
selected
Trigger)
BSIDLSB :<value>
scnReqRssiMin :<value>
Command
Modes
Global command mode
To configure the Scan Negotiation Parameters:
Command
Syntax
npu(config-bs-66053)# scanning [enable-modify {true | false} ]
Privilege
Level
10