User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 525 System Manual
Command
Syntax
npu(config-bs-66053)# triggers-<trigger-name> <trigger-range>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<trigger-name> The Trigger name. Mandatory N/A See
Table 3-2
9
below
<trigger-value> Defines the threshold
value for the Trigger.
Mandatory N/A See
Table 3-2
9
below
Command
Modes
bs configuration mode
Table 3-29: Trigger Names and Possible Value Ranges
Trigger Name Trigger Condition Action Possible Values
triggers-scnreq-cinr-min The C/N at the Serving BS is
below the Trigger threshold
(in dB)
Scan Request -64 to 63.5 in steps of 0.5
triggers-scnreq-rssi-min The RSSI at the Serving BS is
below the Trigger threshold
(in Bm)
-103.75 to -40 in steps of 0.25
triggers-scnreq-rtd-max The Serving BS distance from
the MS (calculated by
measuring the round trip
delay) is above the Trigger
threshold (in meter)
0-3400 in steps of 50 if BS BW
is 10 MHz, 0-6800 in steps of
50 if BS BW is 5 MHz, 0-4800
in steps of 50 if BS BW is 7
MHz