User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 523 System Manual
npu(config-bs-66053)# no nbradvertise triggersetup
3.9.6.3 Displaying Configuration Information for Neighbor
Advertisement Parameters
To display configuration information for the Neighbor Advertisement parameter,
run the following command:
npu# show nbradvertise bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Neighbor Advertisement parameters of BS 66053, run the
following command:
npu# show nbradvertise bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show nbradvertise bs
NOTE
Refer to Section 3.9.6.1 for a description and default values of these parameters.
Command
Syntax
npu(config-bs-66053)# no nbradvertise [triggersetup]
Privilege
Level
10
Command
Modes
bs configuration mode
Command
Syntax
npu# show nbradvertise bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1