User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 522 System Manual
 Configure one or more of the Neighbor Advertisement parameters (refer to
Section 3.9.6.1).
 Restore the default values of one or all of the Neighbor Advertisement
parameters (refer to Section 3.9.6.2).
You can display configuration information for the Neighbor Advertisement
parameters of a selected or all existing BSs (refer to Section 3.9.6.3).
3.9.6.1 Configuring Neighbor Advertisement Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# nbradvertise [triggersetup <(0 to 100 StepSize 0.1)>]
3.9.6.2 Restoring the Default Values of Neighbor Advertisement
Parameter
Since there is only one Neighbor Advertisement parameter, run any of the
following commands to restore it to the default value:
npu(config-bs-66053)# no nbradvertise
To configure the Neighbor Advertisement Parameters:
Command
Syntax
npu(config-bs-66053)# nbradvertise [triggersetup <(0 to 100
StepSize 0.1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[triggersetup <(0 to 100
StepSize 0.1)> ]
The periodic NBRADV
transmission interval, in
seconds
Optional 10 0 - 100 in
steps of 0.1
Command
Modes
bs configuration mode