User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 521 System Manual
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show feedbackalloc bs
3.9.6 Managing Neighbor Advertisement
Parameters
After enabling the BS configuration mode, you can execute the following tasks:
Command
Syntax
npu# show feedbackalloc bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display Feedback Allocation
parameter of a specific BS.
Do not specify a value for this
parameter if you want to
display Feedback Allocation
parameter of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
IRCDMAAllocationsPeriod(frames) :<value>
Command
Modes
Global command mode