User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 519 System Manual
3.9.5 Managing BS Feedback Allocation Parameter
After enabling the BS configuration mode, you can execute the following tasks:
 Configure the Feedback Allocation parameter (refer to Section 3.9.5.1).
 Restore the default values of the Feedback Allocation parameter (refer to
Section 3.9.5.2).
You can display configuration information for the Feedback Allocation parameter
of a selected or all existing BSs (refer to Section 3.9.5.3).
3.9.5.1 Configuring Feedback Allocation Parameter
From the BS configuration mode, run the following command:
npu(config-bs-66053)# feedbackalloc [ir-cdma <(1 to 1 StepSize 1) |
(2 to 2 StepSize 1) | (4 to 4 StepSize 1) | (6 to 6 StepSize 1) | (8
to 8 StepSize 1) | (10 to 10 StepSize 1)> ]
To configure the Feedback Allocation Parameter:
Command
Syntax
npu(config-bs-66053)# feedbackalloc [ir-cdma <(1 to 1 StepSize 1)
| (2 to 2 StepSize 1) | (4 to 4 StepSize 1) | (6 to 6 StepSize 1)
| (8 to 8 StepSize 1) | (10 to 10 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[ir-cdma <<(1 to 1
StepSize 1) | (2 to 2
StepSize 1) | (4 to 4
StepSize 1) | (6 to 6
StepSize 1) | (8 to 8
StepSize 1) | (10 to
10 StepSize 1)>> ]
The period of IR CDMA
allocations, in frames.
In the current release the
actual value is always 2,
regardless of the
configured value.
Optional 2 1, 2, 4, 6, 8,
10.