User Manual
Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 505 System Manual
npu# show general bs [<(1 to 16777215 StepSize 1)>]
Specify the BS ID (1-16777215) of an existing BS if you want to display
configuration information for a particular BS. Do not specify values for this
parameter if you want to view configuration information for all existing BSs.
Command
Syntax
npu# show general bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<(1 to 16777215
StepSize 1)> ]
The BS ID
Specify a value for this
parameter if you want to
display the general
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the general
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
OperatorID :<value>
BSName :<value>
Defaultuplinkbasicrate :<value>
Defaultdownlinkbasicrateformanagement :<value>
Defaultdownlinkbasicratefordata :<value>
Deployment :<value>
Command
Modes
Global command mode