User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 191 System Manual
3.4.8.4 Displaying ACL 199 Configuration Information
Run the following command to display the configuration information for ACL 199:
npu# show access-lists [{199 | <access-list-199-name}]
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{enable | disable} Indicates whether QoS
marking should be enabled or
disabled for a specific ACL.
Mandatory disable
 enable
 disable
199 Indicates the identifier of the
ACL for which the QoS
marking is to be activated.
You must specify 199.
Mandatory N/A 199
Command
Modes
Global configuration mode
IMPORTANT
An error may occur if the ACL name you have specified does not exist.
Command
Syntax
npu# show access-lists [199| <access-list-199-name}]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[199 |
<access-list-199-n
ame}]
To view configuration
information for ACL 199,
specify 199 or the name
configured for this ACL.
Mandatory
for viewing
information
for ACL 199.
N/A
 199
 String; the
name
configured
for ACL
199.