User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 150 System Manual
3.4.2.3.7 Displaying IP Interface Status and Configuration Information
To display the status and configuration information for an IP interface, run the
following command:
npu# show ip interface [{internal-mgmt | external-mgmt | bearer |
local-mgmt}]
Do not specify the interface if you want to view configuration information for all IP
interfaces.
Command
Modes
Interface configuration mode
IMPORTANT
An error may occur if the IP interface does not exist for the configured connectivity and boot mode.
Command
Syntax
npu# show ip interface [{internal-mgmt | external-mgmt | bearer | local-mgmt}]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
{internal-mgmt |
external-mgmt |
bearer | local-mgmt}
Indicates the interface for
which configuration
information is to be
displayed.
Do not specify any value for
this parameter if you want
to view configuration
information for all IP
interfaces.
Optional N/A
 internal-mgmt
 external-mgmt
 bearer
 local-mgmt
Display
Format
<Interface Name> is <up/down>
Internet Address is <value>
Broadcast Address <value>