User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 143 System Manual
3.4.2.2.2 Displaying the Ether Type
Run the following command to display the current Ether Type value:
npu# show npuetherType
3.4.2.3 Configuring IP interfaces
The following IP interfaces are pre-configured in the system:
 Local-management
 Internal-management
 External-management
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{8100 | 88A8 |
9100 | 9200}
Indicates the type of Ether
Type.
Mandatory 88A8
 8100
 88A8
 9100
 9200
Command
Modes
Global configuration mode
Command
Syntax
npu# show npuetherType
Privilege
Level
1
Display
Format
Ethertype: <value>
Command
Modes
Global command mode