User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 142 System Manual
3.4.2.1.7 Displaying the VLAN Translation Entries
Run the following command to display VLAN translation entries for the Data port:
npu# show vlan-mapping
3.4.2.2 Managing the External Ether Type
The External Ether Type parameter defines the EtherType in outer VLAN header of
uplink Q-in-Q traffic. The External Ether Type parameter is not applicable the
device operates in Transparent (Centralized ASN Topology) mode.
This section includes:
 “Configuring the External Ether type”
 “Displaying the Ether Type”
3.4.2.2.1 Configuring the External Ether type
To configure the Ether Type run the following command:
npu(config)# config npuEtherType {8100 | 88A8 | 9100 | 9200}
Command
Modes
Global command mode
Command
Syntax
npu# show vlan-mapping
Privilege
Level
1
Command
Modes
Global command mode
Command
Syntax
npu(config)# config npuEtherType {8100 | 88A8 | 9100 | 9200}
Privilege
Level
10