User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 139 System Manual
3.4.2.1.4 Terminating the Interface Configuration Mode
To terminate the interface configuration mode, run the following command:
npu(config-if)# exit
Command
Syntax
npu(config-if)# no vlan mapping {all | <integer(9|11-100|110-4094)> <integer(9|11-100|110-4094)>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
{all |
<integer(9|11-100|110-40
94)>
<integer(9|11-100|110-40
94)>}
Indicates the
VLAN translation
entry to be
deleted.
Mandatory N/A
all: Indicates that
all VLAN
translation entries
are to be deleted.
<integer(9|11-100|1
10-4094)>
<integer(9|11-100|
110-4094)>:
Indicates the
original and
translated VLAN
IDs for the
translation entry to
be deleted.
Command
Modes
Global command mode
Command
Syntax
npu(config-if)# exit
Privilege
Level
10
Command
Modes
Interface configuration mode