User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 138 System Manual
3.4.2.1.3.3 Deleting a VLAN Translation Entry
To delete an existing VLAN translation entry, run the following command:
npu(config-if)# no vlan mapping {all | <integer(9|11-100|110-4094)>
<integer(9|11-100|110-4094)>}
Specify all if you want to delete all the VLAN translation mapping entries. Specify
the VLAN identifiers of the translation entry if you want to delete a specific VLAN
entry.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<integer(9|11-100|
110-4094)>
The first VLAN ID Indicates
the VLAN ID of the VLAN for
which VLAN translation is
required.
Legitimate values include:
 The Bearer VLAN ID
(default 11).
 The External
Management VLAN ID
(default 12) - only in
In-Band Connectivity
Mode.
Mandatory N/A 9, 11-100,
110-4094
<integer(9|11-100|
110-4094)>
Indicates the translated VLAN
ID that is being mapped to the
original VLAN ID.
Mandatory N/A 9, 11-100,
110-4094
Command
Modes
Interface configuration mode
IMPORTANT
An error may occur if:
 The VLAN ID or mapping that you have specified is not within the allowed range or it does not
exist.
 You are trying to delete a VLAN translation entry for a VLAN that is not a member of this
physical interface.