User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 126 System Manual
3.4.1.2 Displaying the IP connectivity Mode
To display the IP connectivity mode, run the following command:
npu# show connectivity mode
3.4.2 Configuring Physical and IP Interfaces
The following Ethernet interfaces are provided on the front panel of the NPU for
enabling connectivity with external entities:
 DATA port: A Gigabit Ethernet interface that connects the NPU with the
operator network.
 CSCD port: A Gigabit Ethernet interface that provides a dedicated Ethernet
connectivity to the local management NMS Server, or supports concatenation
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{inband | outband |
unified}
Indicates the connectivity
mode to be configured.
Mandatory inband
 inband
 outband
 unified
Command
Modes
Global configuration mode
Command
Syntax
npu# show connectivity mode
Privilege
Level
1
Display
Format
Current connectivity mode: <value> Next Boot connectivity mode: <value>
Command
Modes
Global command mode