User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing Software Upgrade
4Motion 118 System Manual
3.2.3.7 Displaying Images Residing in the Flash
To display the images residing in the flash, run the following command:
npu# show au image repository
Syntax
Description
Parameter Description Presence Default
Value
Possible Value
<au image name> Denotes the name of the AU
image that is to be deleted
from the NPU flash.
Mandatory N/A Valid image
name
Command
Modes
Global configuration mode
Command
Syntax
npu# show au image repository
Command
Modes
Global command mode