User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 241 System Manual
npu# show contextfn
The following table provides some details on the read-only parameters that are
configurable only by the vendor:
3.4.12.5 Managing the MS State Change Functionality
The MS state change functionality manages MS states within an MS context.
Command
Syntax
npu# show contextfn
Privilege
Level
1
Command
Modes
Global command mode
Display
Format
Asn-gateway Context config
ctxtfnTimerContextReq: <value>
ctxtfnCounterContextReqMax: <value>
ctxtfnTimerContextRprt: <value>
ctxtfnCOUNTerContextRprtMax: <value>
ctxtfnMsCapacityThreshold: <value>
Command
Modes
Global command mode
Parameter Description
ctxtfnTimerContextReq The period, in milliseconds, for which the NPU waits for a response to the
context request. If the NPU does not receive a response to this request
within the period specified by this timer, the NPU retransmits this request.
ctxtfnCounterContextReqMax The maximum number of times the NPU will retransmit a context request.
ctxtfnTimerContextRprt The period, in milliseconds, for which the NPU waits for the context report
acknowledgement. At the end of this period, the NPU retransmits the
context report.
ctxtfnCOUNTerContextRprtMax The maximum number of times, the NPU retransmits the context report.