User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 240 System Manual
3.4.12.4.2 Restoring the Default Configuration Parameter for the Context
Function
To restore the default configuration for the context function, run the following
command:
npu(config)# no contextfn [ms-capacity-threshold]
3.4.12.4.3 Displaying Configuration Information for the Context Function
To display configuration information for the context function, run the following
command:
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
ms-capacity-thresh
old <integer
(1-3000)>
Maximal number of active MS
that can be served by
ASN-GW. Used as threshold
for "no resource" reject and
relevant alarm.
Optional 500 1-3000
Command
Modes
Global configuration mode
NOTE
Refer to Section 3.4.12.4.1 for a description and default value of this parameters.
Command
Syntax
npu(config)# no contextfn
[ms-capacity-threshold]
Privilege
Level
15
Command
Modes
Global configuration mode