User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 234 System Manual
npu# show authenticator
The following table provides some details on these parameters:
Command
Syntax
npu# show authenticator
Privilege
Level
1
Display
Format
Authenticator Function Configuration :
eapTimerIdReq <value>
eapCounterIdReqMax <value>
authTimerNtwEntryHold <value>
eapTimerTransfer <value>
eapCounterTransferMax <value>
eapCounterReAuthAttemptMax <value>
authTimerReauthCmpltHold <value>
eapCounterRndTripsMax <value>
authTimerPmkLifetime <value>
authTimerPmkGaurd <value>
authCounterNtwEntryMax <value>
authTimerAuthFailureHold <value>
Command
Modes
Global command mode
Parameter Description
eapTimerIdReq The period, in milliseconds, the NPU waits for the EAP Transfer response.
eapCounterIdReqMax The period, in milliseconds, for which the NPU should wait for the
response to the request for the EAP ID.
authTimerNtwEntryHold The period, in seconds, within which the MS should be authenticated for
initial entry into the network. If the MS is not authenticated within this
period, the NPU terminates the request for network entry.