User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 229 System Manual
3.4.11.2 Removing an ASN-GW from a BTS Load Balancing Pool
Run the following command to remove an ASN-GW from Pool 1:
npu(config)# no loadbalancePool1IP <ip-address>
Run the following command to remove an ASN-GW from Pool 2:
npu(config)# no loadbalancePool2IP <ip-address>
Specify an ip-address to remove it from the pool.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<ip-address> A unique IP address
to be added to the
pool
Mandatory N/A IP address
Command
Modes
Global configuration mode
Command
Syntax
npu(config)# no loadbalancePool1IP <ip-address>
npu(config)# no loadbalancePool2IP <ip-address>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<ip-address> An IP address to be
removed from the pool
Do not specify an ip
address to remove all
ip addresses from the
pool.
Optional N/A IP address
Command
Modes
Global configuration mode