User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 225 System Manual
3.4.10.3.4 Terminating the Interface Configuration Mode
To exit the interface configuration mode and return to the global configuration
mode, run the following command:
npu(config-if)# exit
IMPORTANT
An error may occur if the ACL number/name that you have specified does not exist or is already
attached to this interface.
Command
Syntax
npu(config-if)# no ip access-group {<access-list-number (1-199)> | <access-list-name>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{<access-list-numb
er (1-199)> |
<access-list-name
>}
Indicates the number/name of
the ACL to be detached from
this interface.
Mandatory N/A
 1-199
 String
Command
Modes
Interface configuration mode
Command
Syntax
npu(config-if)# exit
Privilege
Level
10
Command
Modes
Interface configuration mode