User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 222 System Manual
1 Check if the ACL is attached to the interface. For more information about this
command, refer Section 3.4.10.4.
2 Enable the interface configuration mode and de-attach the ACL. For details,
refer Section 3.4.10.3.
3 Terminate the interface configuration mode to return to the global
configuration mode (refer Section 3.4.10.3.4).
4 Run the following command to delete the ACL:
npu(config)# no ip access-list {standard <access-list-number
(1-99)> | extended <access-list-number (100-199)>}
IMPORTANT
An error may occur if:
 The ACL you are trying to delete is INACTIVE.
 The ACL number you have specified does not exist.
Command
Syntax
npu(config)# no ip access-list {standard <access-list-number (1-99)> | extended
<access-list-number (100-199)>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{ standard
<access-list-numb
er (1-99)> |
extended
<access-list-numb
er (100-199)> }
Indicates the ACL number of
the standard or extended
ACL to be deleted.
Mandatory N/A
 Standard
(1-99)

Extended
(100-199)
Command
Modes
Global configuration mode