User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 309 System Manual
3.4.12.10.10Displaying Configuration Information for the Service Group
To display configuration information for one service group or for all service
groups, run the following command:
npu# show srvc-grp [<grp-alias>]
NOTE
A Service Group cannot be deleted if it is assigned to a Service Flow. For details refer to
“Configuring Service Flows” on page 314.
To delete a VLAN service group (associated with a VLAN service interface), first execute the "no
vlan-enable" command (refer to
Section 3.4.12.10.3).
Command
Syntax
npu(config)# no srvc-grp <grp-alias>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<grp-alias> Denotes the group-alias for
which the service group to be
deleted.
Mandatory N/A String
Command
Modes
Global configuration mode
Command
Syntax
npu# show srvc-grp [<grp-alias>]
Privilege
Level
1