User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 305 System Manual
3.4.12.10.7 Configuring the Parameters of a VPWS-Mapped Service Group
After enabling the service group configuration mode for a VPWS-Mapped service
group, you can configure the following parameters for the service group:
Accounting parameters (see Section 3.4.12.10.7.1)
VID Map Range parameters (see Section 3.4.12.10.7.2)
3.4.12.10.7.1 Configuring the Accounting Parameters of a VPWS-Mapped Service Group
run the following command to configure the accounting parameters for the service
group:
npu(config-srvcgrp-VPWS-Mapped)# config {acct {none|time} |
acctInterimTmr <integer(0|5-1600)>}
NOTE
You can display configuration information for the service group. For details, refer to
Section 3.4.12.11.2.
Command
Syntax
npu(config-srvcgrp-VPWS-Mapped)# config {acct {none|time} | acctInterimTmr
<integer(0|5-1600)>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values