User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration

4Motion 297 System Manual

IMPORTANT



For DhcpRlOpt82SubOpt1BinFrstrng value, enter hex string without spaces.

 If Opt82Unicast is enabled then DHCP relay agent appends option 82 to all DHCP messages

(unicast and broadcast).

 If Opt82Unicast is disabled (default) then DHCP relay agent appends option 82 only to

broadcast DHCP request messages.

Command

Syntax

npu(config-srvcgrp-dhcprelay-Opt82)# config ([Subopt1value

{Default|MSID|BSID|NASID|NASIP|Full-NAI|Domain|asciiMsID|asciiBsID|asciiBsMac|AsciiFrStrng

<string(32)>|BinFrStrng <string(32)>}] [Subopt2value

{Default|MSID|BSID|NASID|NASIP|Full-NAI|Domain|asciiMsID|asciiBsID|asciiBsMac|AsciiFrStrng

<string(32)>|BinFrStrng <string(32)>}] [Subopt6value

{Default|MSID|BSID|NASID|NASIP|Full-NAI|Domain|AsciiFrStrng <string(32)>|BinFrStrng

<string(32)>}] [{Subopt7value [service-type] [vendor-specific] [session-timeout]}]

[{EnableUnicast|DisableUnicast}])

Privilege

Level