User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 285 System Manual
IMPORTANT
An error may occur if you provide an invalid value for any of these parameters. Refer the syntax
description for more information about the appropriate values and format for configuring these
parameters.
Command
Syntax
npu(config-srvcgrp-dhcpserver)# config ([pool-minaddr <string>] [pool-maxaddr <string>]
[pool-subnet <string>] [dflt-gwaddr <string>] [lease-interval <integer(24-4294967295)>]
[renew-interval <integer>] [rebind-interval <integer>] [dnssrvr-addr <string>] [offerreuse-holdtime
<integer>] [opt60 <string(30)>] [opt43 {[Name <string(64)>] [Value <string(64)>]}] [Sname
<string(64)>] [File <string(128)>] [dnssrvr-addr2 <string>])
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
[pool-minaddr
<string>]
Denotes the minimum
(lowest) IP address of
the address pool to be
used for address
allocation for MSs from
this Service Group.
DHCP address in the
pool shall not overlap
with the DHCP address
pool defined in an
existing service group
and with ip addresses of
host interfaces (Bearer,
External mgmt, Internal
mgmt and Local mgmt).
Optional 0.0.0.0 Valid IP Address