User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 267 System Manual
npu(config-aaa)# config ([src-intf <ip-intf>] [primary-serveraddr
<ipv4addr>] [alternate-serveraddr <ipv4addr>] [rad-sharedsecret
<string>] [aaaRedundancy {Enable|Disable}] [rad-CallingStationId
{Binary | UTF-8}])
IMPORTANT
An error may occur if you provide an invalid value for any of these parameters. Refer the syntax
description for more information about the appropriate values and format for configuring these
parameters.
IMPORTANT
If the bearer interface IP address is being modified after aaa-client configuration, you must
re-configure the src-intf parameter to "bearer" so that the aaa-client will attach itself to the new
bearer interface IP address.
Command
Syntax
npu(config-aaa)# config ([src-intf <ip-intf>] [primary-serveraddr <ipv4addr>]
[alternate-serveraddr <ipv4addr>] [rad-sharedsecret <string>] [aaaRedundancy
{Enable|Disable}] [rad-CallingStationId {Binary | UTF-8}])
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[src-intf <ip-intf>] Indicates the interface
providing RADIUS client
functionality. Must be either
the bearer interface or the
external-management
interface.
Optional bearer
 bearer
 external-man
agement
[primary-serveradd
r <ipv4addr>]
Denotes IPv4 address of
the primary AAA server.
primary-serveraddr and
alternate-serveraddr cannot
be the same.
primary-serveraddr and
alternate-serveraddr cannot
have IP address assigned
to NPU IP interfaces.
Mandatory 172.16.0.10 Valid IP
Address