User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 397 System Manual
3.4.13.1.9 Displaying Log Files Residing on the NPU Flash
You can display a list of log files that are residing on the NPU flash. For details,
refer Section 3.11.2.
3.4.13.2 Configuring Module-level Logging
You can configure logging (enable/disable) separately for the following modules,
and define the severity level for which logging is required:
 System startup procedures
 NPU/AU upgrade procedures
 Fault management procedures
 System performance procedures
 Shelf management procedures
 WiMAX signaling protocols
 User interface
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<ip-addr>] Indicates the IP address of
the destination TFTP server.
Mandatory N/A IP address
{<file name (*.tar)>
| All | Latest}
The file(s) to be transferred:
<file name>.tar: A selected
file that exists in the flash.
All: All files in the flash.
Latest: The latest created file.
Mandatory N/A
 <file name
(*.tar)>
 All
 Latest
Command
Modes
Global command mode