User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 389 System Manual
3.4.13.1.2 Disabling Logging to File or Server
To disable logging to file or server, run the following command:
npu(config)# no log destination {file | server <IP address>}
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{file|server <IP
address>}
Indicates whether logs are to
be written to a file or server.
Mandatory N/A
 file:
Indicates
that logs
are to be
written to a
file. (Logs
written to
file are not
maintained
after
system
reset;
periodically
save the log
file to flash.)
For details,
refer to
Section 3
.4.13.1.5
.
 server:
Indicates
that logs
are to be
written to
an external
server.
Specify the
server IP
address of
the server
in the
format,
XXX.XXX.X
XX.XXX.
Command
Modes
Global configuration mode