User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 385 System Manual
3.4.13 Configuring Logging
Logs can be generated to record events that occur with respect to the following
system modules:
 System startup procedures: Refers to all procedures/events that occur during
system startup.
 NPU/AU upgrade procedures: Refers to all the procedures executed while
upgrading the NPU/AU.
 Fault management procedures: Refers to internal processes that are executed
for monitoring erroneous conditions or fault conditions.
 System performance procedures: Refers to internal processes that are
executed for monitoring system performance.
 Shelf management procedures: Refers to internal processes that are executed
for monitoring the health and temperature of all hardware components (other
than the NPU) such as the AU, PIU and PSU.
 WiMAX signaling protocols: Refers to all the protocols that implement the
ASN-GW functionality.
 User interface: Refers to the command line or remote management interface
used for executing all user-initiated events such as system shut down or reset.
 AU Manager: Refers to all internal processes used for fault, configuration, and
performance management for AU.
Display
Format
% Asn-gateway Keep Alive Configuration
asn-ka : <enable/disable>
period : <value>
rtx-cnt : <value>
rtx-time : <value>
Command
Modes
Global command mode