User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 384 System Manual
3.4.12.14.2 Displaying Configuration Information for ASN-GW Keep-Alive
Parameters
To display the ASN-GW keep-alive parameters, run the following command:
npu# show keep-alive
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[asn-ka
<enable|disable>]
Enable/Disable the ASN-GW
keep-alive mechanism.
Optional disable
 enable
 disable
[period <integer
(10-1000)>]
The period in seconds
between polling sessions.
period x 1000 (value in
milliseconds) cannot be lower
than rtx-time x (rtx-cnt +1).
Optional 60 10-1000
[rtx-cnt <integer
(0-10)>]
Maximum number of retries if
rtx-time has expired without
getting a response.
Optional 5 1-10
[rtx-time <integer
(5000-10000)>]
Time in milliseconds to wait
for a response before
initiating another polling
attempt or reaching a
decision that the polled entity
has failed (if the maximum
number of retries set by
rtx-cnt has been reached).
Optional 5000 5000-10000
Command
Modes
Global configuration mode
Command
Syntax
npu# show keep-alive
Privilege
Level
1