User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 381 System Manual
3.4.12.13.5 Displaying the Status of the Hot-Lining Feature
To display the status of the Hot-Lining feature, run the following command:
npu# show hotlining-status
Display
Format
% Asn-gw hotlining profile configuration:
For each displayed profile (specific or all) the following will be displayed:
Hotlining profile: <name>
Redirection address: <address.>
Status: <Disabled/Enabled>
for each displayed profile, all defined filter rules will be displayed. For each rule, the following details
will be displayed:
Filter rule: <name>1
Protocol: <value> (only if defined)
Src Port: <start value-stop value> (only if defined)
Dst Port: <start value-stop value> (only if defined)
Action: <drop/pass/redirect>
Direction: <uplink/downlink>
Priority of looking for a match is according to the order of the displayed rules.
Command
Modes
Global command mode
Command
Syntax
npu# show hotlining-status
Privilege
Level
1
Display
Format
Hotlining status: <Enabled/Disabled>
Command
Modes
Global command mode