User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 366 System Manual
3.4.12.12.4 Deleting PHS Rules
Run the following command to delete one or all PHS rules:
npu(config)# no phs-rule [<rulename>]
3.4.12.12.5 Displaying Configuration Information for PHS Rules
To display all or specific PHS rules, run the following command:
npu# show phs-rule [<rulename>]
Specify the rule name if you want to display configuration information for a
particular PHS rule. Do not specify a value for this parameter if you want to view
configuration information for all PHS rule.
CAUTION
Specify the rule name if you want to delete a specific PHS rule. Otherwise all the configured PHS
rules are deleted.
Command
Syntax
npu(config)# no phs-rule [<rulename>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<rulename>] Denotes the rule name of the
PHS rule that you want to
delete.
Specify a value for this
parameter if you want to
delete a specific PHS rule. Do
not specify a value for this
parameter, if you want to
delete all PHS rules.
Optional N/A String
Command
Modes
Global configuration mode