User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 641 System Manual
3.9.25.3 Restoring the Default Configuration of ASN-GW Load
Balancing Pools
After enabling the ASN-GW Load Balancing configuration mode, run the following
command to restore the default configuration of ASN-GW load balancing pools:
npu(config-bs-5-ASNGWLoadBalancing)# no ASNGWLoadBalancing
[asn-gw-pool-1 ] [asn-gw-pool-2 ]
Specify a pool to restore the configuration of this pool to the default value
(enabled).
Do not specify any pool to restore the configuration of both pools to the default
value (enabled).
3.9.25.4 Displaying Configuration Information for ASN-GW Load
Balancing Pools
To display configuration information of ASN-GW Load Balancing Pool, run the
following command:
Command
Syntax
npu(config-bs-5-ASNGWLoadBalancing)# no ASNGWLoadBalancing [asn-gw-pool-1 ]
[asn-gw-pool-2 ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[asn-gw-pool-1 ] Specify pool 1 to
return the
configuration of this
pool to the default
value (enabled)
Optional N/A asn-gw-pool-1
[asn-gw-pool-2 ] Specify pool 2 to
return the
configuration of this
pool to the default
value (enabled)
Optional N/A asn-gw-pool-2
Command
Modes
bs asn-gw load balancing configuration mode