User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 636 System Manual
3.9.24.1 Configuring Scheduler Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# scheduler [scheduler-mode {equalRate | equalTime} ]
[dl-abuse-protection-level {none | low | medium} ] [ul-abuse-protection-level
{none | low | medium} ]
To apply the changes, run the following command:
npu(config-bs-66053)# scheduler-apply
To configure the Scheduler parameters:
Command
Syntax
npu(config-bs-66053)# scheduler [scheduler-mode {equalRate |
equalTime} ] [dl-abuse-protection-level {none | low | medium} ]
[ul-abuse-protection-level {none | low | medium} ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
scheduler-mode
{equalRate |
equalTime} ]
The scheduling scheme
for uncommitted data.
Optional equalRate
 equalRate
 equalTime
dl-abuse-prote
ction-level
{none | low |
medium}
The protection level for
the downlink for
equalRate scheduling
mode.
Optional none
 none
 low
 medium
ul-abuse-prote
ction-level
{none | low |
medium}
The protection level for
the uplink for equalRate
scheduling mode.
Optional none
 none
 low
 medium
Command
Modes
bs configuration mode