User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 631 System Manual
3.9.22.2 Displaying Configuration Information for BS Keep-Alive
Parameters
To display the BS keep-alive parameters, run the following command:
npu# show keep-alive
bs [<(1 to 16777215 StepSize 1)
[rtx-time <(5000 to
10000 StepSize
1)> ]
Time in milliseconds to wait
for a response before
initiating another polling
attempt or reaching a
decision that the polled entity
has failed (if the maximum
number of retries set by
rtx-cnt has been reached).
Optional 5000 5000-10000
Command
Modes
bs configuration mode
Command
Syntax
npu# show keep-alive bs (<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Keep-Alive
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the Keep-Alive
parameters of all BSs.
Optional N/A 1-16777215