User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 628 System Manual
3.9.21 Managing BS Reserved Parameters
3.9.22 Managing the BS Keep-Alive Functionality
Once an MS enters the network, its context is stored in ASN entities (BS,
ASN-GW). Dynamically, MS context could be transferred/updated (during HO and
re-authentication) to other entities or duplicated to other entities (separation
between anchor functions such as Authenticator, Data Path and Relay Data
Path).
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
UplinkMedNoise
Uplink99%Noise(dBm) :<value>
ThresholdforExcessiveDLDroppedPacketsRatioBestEffort:<value>
ThresholdforExcessiveDLDroppedPacketsRatioRealTime:<value>
ThresholdforExcessiveDLDroppedPacketsRatioNonRealTime:<value>
ThresholdforExcessiveDLDroppedPacketsRatioUgs :<value>
ThresholdforExcessiveDLDroppedPacketsRatioErt :<value>
Command
Modes
Global command mode
NOTE
The BS reserved parameters table enables configuring up to 21 parameters that are reserved for
possible future use. In the current release none of the reserved parameters is being used.
Therefore, the following commands are not applicable:
 Configure reserved parameters: npu (config-bs-<N>)# bs-reserved [reserved-1 <string (32)> ]
[reserved-2 <string (32)> ] [reserved-3 <string (32)> ] [reserved-4 <string (32)> ] [reserved-5
<string (32)> ] [reserved-6 <string (32)> ] [reserved-7 <string (32)> ] [reserved-8 <string (32)> ]
[reserved-9 <string (32)> ] [reserved-10 <string (32)> ] [reserved-11 <string (32)> ] [reserved-12
<string (32)> ] [reserved-13 <string (32)> ] [reserved-14 <string (32)> ] [reserved-15 <string
(32)> ] [reserved-16 <string (32)> ] [reserved-17 <string (32)> ] [reserved-18 <string (32)> ]
[reserved-19 <string (32)> ] [reserved-20 <string (32)> ] [reserved-21 <string (32)> ].
 Restore default values of reserved parameters: npu(config-bs-<N>)# no bs-reserved
[reserved-1 ] [reserved-2 ] [reserved-3 ] [reserved-4 ] [reserved-5 ] [reserved-6 ] [reserved-7 ]
[reserved-8 ] [reserved-9 ] [reserved-10 ] [reserved-11 ] [reserved-12 ] [reserved-13 ]
[reserved-14 ] [reserved-15 ] [reserved-16 ] [reserved-17 ] [reserved-18 ] [reserved-19 ]
[reserved-20 ] [reserved-21 ].
 Display configured values of reserved parameters: npu# show bs-reserved bs [<(1 to 16777215
StepSize 1).