User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 625 System Manual
ul-mednoise <(-135 to
-100 StepSize 1)>
The uplink median noise
level represents the
median value of the noise
floor histogram. If the
uplink median noise level
exceeds this value, an
excessive uplink median
noise alarm will be
generated.
The value is in dBm/tone.
The default value is set to
3 dB above the default
value of the target noise
and interference level for
the PUSC zone (target-ni
parameter, see
Section 3.9.4.2.1)
Optional -124 -135 to -100
ul-99prcntnoise
<(-135 to -100
StepSize 1)>
The uplink 99% noise
level represents the 99%
value of the noise floor
histogram. If the uplink
99% noise level exceeds
this value, an excessive
uplink 99% percentile
noise alarm will be
generated.
Optional -100 -135 to -100
[Be-exc-dl-dro
p-thr <(1 to
1000 StepSize
1)> ]
Threshold for Excessive
DL Dropped Packets
Ratio for Best Effort (in
promils)
Optional 1000 1 - 1000
[rt-exc-dl-dro
p-thr <(1 to
1000 StepSize
1)> ]
Threshold for Excessive
DL Dropped Packets
Ratio for Real Time (in
promils)
Optional 1000 1 - 1000
[nrt-exc-dl-dr
op-thr <(1 to
1000 StepSize
1)> ]
Threshold for Excessive
DL Dropped Packets
Ratio for Non Real Time
(in promils)
Optional 1000 1 - 1000
[ugs-exc-dl-dr
op-thr <(1 to
1000 StepSize
1)> ]
Threshold for Excessive
DL Dropped Packets
Ratio for UGS (in promils)
Optional 1000 1 - 1000