User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 623 System Manual
npu# show ranging-general bs
3.9.20 Managing Alarm Threshold Parameters
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the Alarm Threshold parameters (refer to
Section 3.9.20.1).
 Restore the default values of some or all of the Alarm Threshold parameters
(refer to Section 3.9.20.2).
Command
Syntax
npu# show ranging-general bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Ranging General
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the Ranging General
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
StartofRangingCodes :<value>
MaximumCellRadius(km) :<value>
Command
Modes
Global command mode