User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 617 System Manual
npu# show idip bs 66053 nw-node-id 66055
Do not specify these parameters if you want to view information of ID-IP Mapping
entries in all existing BSs. To display information for all BSs, run the following
command:
npu# show idip bs
Command
Syntax
npu# show idip bs [<(1 to 16777215 StepSize 1)> nw-node-id <(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display specific ID-IP
Mapping entry in a specific
BS. Do not specify a value for
this parameter if you want to
display all ID-IP Mapping
entries of all BSs.
Optional N/A 1-16777215
nw-node-id <(1 to
16777215
StepSize 1)>
The Next Hop (Network
Node) BS ID.
Specify a value for this
parameter if you want to
display a specific ID-IP
Mapping entry in a specific
BS. Do not specify a value for
this parameter if you want to
display all ID-IP Mapping
entries of all BSs.
Optional N/A 1-16777215