User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 554 System Manual
3.9.9.7.5 Displaying Configuration Information for All Neighbor BS Parameters
To display configuration for the all Neighbor BS parameters, run the following
command:
npu# show nbr-all bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215
StepSize 1)>]
bs-id-lsb <(1 to
16777215 StepSize
1)>
The Neighbor BS ID.
Specify a value for
this parameter if you
want to display a
specific Specific BS
Trigger in a specific
Neighbor BS of a
specific BS. Do not
specify a value for
this parameter if you
want to display the
Specific BS Triggers
of all Neighbor BSs
in all BSs.
Optional N/A 1-16777215
TrigName
{hoReqCinrMaxNbs |
hoReqRssiMaxNbs |
hoReqCinrMargin |
hoReqRssiMargin} ]
The Trigger name
Specify only if you
want to display a
specific Specific BS
Trigger of a specific
Neighbor BS in a
specific BS. Do not
specify if you want to
display all Specific BS
Triggers parameters
of all Neighbor BSs in
all BSs
 {hoReqCinrMaxNbs
 hoReqRssiMaxNbs
 hoReqCinrMargin
 hoReqRssiMargin}
Display
Format
(for a
selected
Trigger)
BSIDLSB :<value>
BSIDLSB :value>
hoReqRssiMaxNbs :value>
Command
Modes
Global command mode