User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 552 System Manual
3.9.9.7.4 Displaying Configuration Information for Neighbor BS Specific BS
Triggers Parameters
To display configuration information for Neighbor BS Specific BS Triggers
parameters, run the following command:
npu# show nbr-specific bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to
16777215 StepSize 1)> TrigName {hoReqCinrMaxNbs | hoReqRssiMaxNbs |
hoReqCinrMargin | hoReqRssiMargin} ]
Specify the BS ID, Neighbor BS ID (bs-id-lsb) and Specific BS Trigger name if you
want to display configuration for a particular Trigger. For example, to display the
hoReqRssiMaxNbs parameters of BS Neighbor 68000 in BS 66053, run the
following command:
npu# show nbr-specific bs 66053 bs-id-lsb 68000 TrigName
hoReqRssiMaxNbs
TrigName
{scnReqCinrMin |
scnReqRssiMin |
scnReqRtdMax |
hoReqCinrMaxNbs |
hoReqRssiMaxNbs |
hoReqCinrMargin |
hoReqRssiMargin |
hoReqRtdMax |
hoReqCinrMinSbs |
hoReqRssiMinSbs} ]
The Trigger name
Specify only if you
want to display a
specific Trigger of a
specific Neighbor BS
in a specific BS. Do
not specify if you
want to display all
Triggers parameters
of all Neighbor BSs in
all BSs
 scnReqCinrMin
 scnReqRssiMin
 scnReqRtdMax
 hoReqCinrMaxNbs
 hoReqRssiMaxNbs
 hoReqCinrMargin
 hoReqRssiMargin
 hoReqRtdMax
 hoReqCinrMinSbs
 hoReqRssiMinSbs}
Display
Format
(for a
selected
Trigger)
BSIDLSB :<value>
BSIDLSB :value>
scnReqCinrMin :value>
Command
Modes
Global command mode