User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 551 System Manual
Do not specify these parameters if you want to view configuration information for
all existing Neighbor BSs in all BSs. To display information for all Neighbor BSs in
all BSs, run the following command:
npu# show nbr-triggers bs
Command
Syntax
npu# show nbr-triggers bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215
StepSize 1)>
TrigName {scnReqCinrMin | scnReqRssiMin | scnReqRtdMax | hoReqCinrMaxNbs |
hoReqRssiMaxNbs | hoReqCinrMargin | hoReqRssiMargin | hoReqRtdMax | hoReqCinrMinSbs |
hoReqRssiMinSbs} ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for
this parameter if you
want to display a
specific Trigger in a
specific Neighbor BS
of a specific BS. Do
not specify a value for
this parameter if you
want to display the
Triggers of all
Neighbor BSs in all
BSs.
Optional N/A 1-16777215
bs-id-lsb <(1 to
16777215 StepSize
1)>
The Neighbor BS ID.
Specify a value for
this parameter if you
want to display a
specific Trigger in a
specific Neighbor BS
of a specific BS. Do
not specify a value for
this parameter if you
want to display the
Triggers of all
Neighbor BSs in all
BSs.
Optional N/A 1-16777215