User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 581 System Manual
npu# show airframe-mapzone bs
3.9.12.5.3 Displaying Configuration Information for Airframe Downlink Diversity
Parameters
To display configuration for the Airframe Downlink Diversity parameters, run the
following command:
npu# show airframe-dldiversity bs [<(1 to 16777215 StepSize 1)>]
Command
Syntax
npu# show airframe-mapzone bs [<(1 to 16777215 StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Airframe Map
Zone parameters of a specific
BS. Do not specify a value for
this parameter if you want to
display the Airframe Map
Zone parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing
Neighbor
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
MapZoneSize(symbols) :<value>
MapMajorGroups :<value>
BasicMapRepetitions :<value>
RcidUsage :<enable/disable>
Command
Modes
Global command mode