User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs

4Motion 579 System Manual

 Map Zone (refer to Section 3.9.12.5.2)

 Downlink Diversity (refer to Section 3.9.12.5.3)

 Uplink Feedback Zone (refer to Section 3.9.12.5.4)

 Downlink Data Zone (refer to Section 3.9.12.5.5)

 Uplink Data Zone (refer to Section 3.9.12.5.6)

 Mimo (refer to Section 3.9.12.5.7)

 All (refer to Section 3.9.12.5.8)

3.9.12.5.1 Displaying Configuration Information for Airframe General Parameters

To display configuration for the Airframe General parameters, run the following

command:

npu# show airframe-general bs [<(1 to 16777215 StepSize 1)>]

Specify the BS ID if you want to display configuration for a particular BS. For

example, to display the Airframe General parameters of BS 66503, run the

following command:

npu# show airframe-general bs 66053

Do not specify the BS ID if you want to view configuration information for all

existing BSs. To display information for all BSs, run the following command:

npu# show airframe-general bs

Command

Syntax

npu# show airframe-general bs [<(1 to 16777215 StepSize 1)> ]

Privilege

Level