User Manual

Chapter 4 - Operation and Administration of the Micro BTS GPS Menu
4Motion 740 System Manual
4.9 GPS Menu
The GPS menu includes the following options:
 “General Configuration”
 “Inventory & Statuses”
4.9.1 General Configuration
The GPS General Configuration menu enables viewing/updating the following
parameters:
4.9.1.1 GPS Type
The type of time synchronization source to be used. The currently available
options are None and Trimble Lassen.
The default is None,
4.9.1.2 Longitude
The longitude of the site. The format is lll.mmm,a: lll.is longitude in degrees
(between 000 to 179); mmm is in minutes (between 000 and 999); a - is E (east) or
W (west). The default is 000.000,E.
Configurable only if GPS Type set to None. Otherwise they are read-only,
displaying the value calculated by the GPS receiver.
4.9.1.3 Latitude
The latitude of the site. The format is ll.mmm,a: ll.is latitude in degrees (between
00 to 89); mmm is in minutes (between 000 and 999); a - is N (north) or S (south).
The default is 00.000,N.
Configurable only if GPS Type set to None. Otherwise they are read-only,
displaying the value calculated by the GPS receiver.
4.9.1.4 Altitude
The altitude in meters of the site in meters, from -300.0 to 9000.0. The default is
0.
Configurable only if GPS Type set to None. Otherwise they are read-only,
displaying the value calculated by the GPS receiver.