User Manual

Chapter 4 - Operation and Administration of the Micro BTS Equipment Menu
4Motion 737 System Manual
AAAA = Lower bound of frequency band in MHz, rounded up to the nearest
integer.
BBBB = Upper bound of frequency band in MHz, rounded down.
ZZZ = always 000 in TDD systems.
W = always N in TDD systems.
PP = maximum transmit power in dBm, rounded down.
R = number of receive channels.
T = number of transmit channels.
C = Y if cavity filter or a gap in the band is present, N if not.
O = Reserved (0).
u = Indication of a Micro BTS Radio
4.8.2.1.2 Required Frequency Band
Read-only. The frequency band according to the properties defined by the required
radio type.
4.8.2.1.3 Required Maximum TX Power
Read-only. The maximum Tx power according to the properties defined by the
required radio type.
4.8.2.1.4 Required Port Configuration
Read-only. The port configuration according to the properties defined by the
required radio type.
4.8.2.1.5 Installed Radio Type
Read-only. The actually installed radio type. Available only after completing
proper creation of the BS (including a Center Frequency in the correct range) and
configuring a proper value for the Port’s Tx Power parameter. The Serial Number
and the values of the Port’s read-only parameters are available only after detecting
the Installed Radio Type.
4.8.2.1.6 Installed Frequency Band
Read-only. The frequency band according to the properties defined by the
installed radio type.
4.8.2.1.7 Required Maximum TX Power
Read-only. The maximum Tx power according to the properties defined by the
installed radio type.